Inspect the Part to see the Mold

October 2008

This article originally appeared in MoldMaking Technology

In the simplest terms, a good mold is one that makes good parts. When your customer is making good parts, no one questions the mold. It’s when the parts are not meeting spec that the mold – as one of the main elements of the molding system – is called into question. In these situations, one common proposal is to measure the mold to ensure that it conforms to the designed dimensions. While this can be both useful and necessary, this approach poses certain problems:

  • It is difficult to quickly and easily measure a mold due to its often large size and weight. This can create a prolonged period of costly downtime.
  • Most molds do not have their own direct dimensional specs; rather, their design dimensions are derived from the specifications of the parts they are designed to mold and it is often the mold maker, and not the end customer, who is responsible for designing the mold. For this reason, determining if a mold was manufactured according to spec provides only a partial answer to the question of why parts are not meeting spec.

An alternative method of determining mold dimensional suitability is used by many ShapeGrabber@reg; customers. They use a ShapeGrabber® industrial 3D laser scanner to conduct a detailed inspection of the molded parts. In just a few minutes, the scanner collects millions of data points, measuring the complete part both quickly and accurately. The large density of data makes it possible to “see” the measured part and compare it directly to the CAD model. The scanned image of the radiator tank shown to the right illustrates how clearly deviations can be seen when the scanned data is compared to the CAD model using Polyworks® Inspector 3D analysis software.

This approach enables design engineers and process engineers to obtain the information they need to determine the cause of the problem in a way that tables of data generated by coordinate measuring machines (CMM) simply cannot provide. In fact, the high data density may suggest a completely different cause of the problems other than the mold – such as problems with raw materials or a flaw in the molding process. And if the problem does lie with the mold, ShapeGrabber will pinpoint the location.